 Recognized as the Leader in repair of cracked or damaged castings. We do field machining, alignment and consultation for equipment problems, world-wide. Rich in experience----Eager to serve |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
REYNOLDS FRENCH FIX #5
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Find Your Rep
|
Let Us Show You How!
|
|
|
|
 |
LS-8 Repaired on Site |
 |
LS-8 REPAIRED ON SITE
|
|
 |
 |
|
Engine has damage on engine base and center frame.
|
Base repaired on site using steel
fabrication and metal locks
|
Another engine returned to service by REYNOLDS-FRENCH repair
methods
|
WHAT'S NEW IN MAJOR CASTING REPAIR...
|
REYNOLDS-FRENCH "know-how" saved this
block. A new cast section was used to replace the damaged bed section and, once
again, an engine was put back into service through the experience and expertise
of REYNOLDS-FRENCH. |
|
|
THE PROBLEM:
|
|
|
|
|
|
|
|
|
|
|
CO-GEN LSVB-20 RESTORED ON SITE
LSVB-20 required the following:
|
 |
||||||||||
|
|
Left hand side of engine showing damage to base and center frame.
|
||||||||||
 |
 |
||||||||||
|
Inside view of crankshaft damage
|
Crankshaft straightened, crankpin
turned, counter weight landings machined and counterweight studs replaced. |
||||||||||
 |
 |
||||||||||
|
Area being repaired with steel
fabrication and metal locks |
Job completed making this another
engine
returned to service by REYNOLDS-FRENCH! |
||||||||||
REPLACING DAMAGED MAIN BEARING SADDLES ON LSV IN HAWAII
|
|
|
|
|
|
|
Broken main bearing saddle removed
|
Base being made ready
for replacement casting |
|
|
|
|
One of two new cast saddles set in
place.
|
New saddles being line bored
|
 |
|
|
Saddles in place and unit ready for reassembly
|
|
Broken main bearing saddle
removed.
FLYWHEEL FLANGES TURNED ON SITE
OEM specs maintained in the field by use of portable machine tools and Reynolds-French expertise.
|
Following are a few of our on-site machine services:
|
Flywheel flanges machined on
site.
 |
 |
|
|
Boring upper liner fits
|
Crankpin turning, straightening and polishing on site
|
|
Block erosion and cylinder liner landing—repair machined and stainless steel inserts installed
|
|
|
Reynolds French has a
COMPLETE MACHINE SHOP AND FACILITIES We Work On Your Site or In Our Shop. |
|
| TOP | |
|
|
||
|
Reynolds French & Co. 12525 E. 60th St. Tulsa, OK 74146 |
Web Design by PRO Designs |